Version 24.02.2011
Se
it
e
3
1.2.
Check compatibility of vehicle and accessories
1.3.
Checking the DIP switches on the CAN-box
2.
Installation
Switch off ignition and disconnect the vehicle from the battery!
The interface needs a permanent 12V source. If power source is not taken directly from
battery, the connection has to be checked for being start-up proven and stable.
Complete and correct function of the interface is possible only when, CAN
and
fibre optical
connections are made properly. Vehicles without TV icon will be programmed automatically
after installation of the interface.
2.1.
Installation 1series (E87), 3series (E90/E91/E92), 6series (E63/E64), X5(E70), X6(E71)
at example 5series (E60/E61)
Needed parts
1.
fibre optical interface C1C-M36
2.
CAN interface TV-436
3.
CAN interface harness TV-BMW01
Requirements
Vehicle
1series (E87)
only CCC
, 3series (E90/91/92), 5series
(E60/61), 6series (E63/64), 7series (E65/66), X5 (E70), X6
(E71), Z4 (E89)
Navigation
navigation system
Professional
CCC, E65 or CIC
with 6.5” or 8.8” monitor
Limitations
factory-TV-tuner
has to be removed if installed
factory-RSE (E65)
need additional interface, VL-RGB02-C
Vehicles with CIC
Dip 1 ON, Dip 2 OFF, Dip 3 OFF
Vehicles with CCC or E65
Dip 1 OFF, Dip 2 OFF, Dip 3 OFF