Carat FACOMBI-3IN1-1, Руководство по эксплуатации

Страница: 29 / 44

EN
G
LIS
H
29
OPERATING THE TOOL
READ SAFETY INSTRUCTION SECTION OF THIS MANUAL
LOADING THE TOOL
WARNING:
Always connect air before loading the tool
„
Side loading
See graphics B - C - D pag. 2 - 3
• Press the latch (A) downwards, and pull the magazinecover (B) backwards
• When filling the magazine, hold the tool so that the nose is not pointing towards own body or
towards any other person. Do not load the tool with nails with the safety trip or trigger depressed.
• Load the nails and slide the magazine cover forward as far as the position where it gets locked.
„
Rear loading
See graphic E pag. 3
• Pull pusher (B) back until the nail follower falls behind the nails. Insert strip of nails into rear of
magazine (A)
• Do not load with safety or trigger depressed
ADJUSTING DEPTH
See graphic F pag. 3
The depth that the nail is driven can be adjusted using the depth adjustment next to the trigger of the
tool.
• To drive the nail shallower, turn the wheel(A) to right to the extent desired.
• To sink a nail deeper, turn the wheel(A) to left to the extent desired.
• Make sure that the trigger and safety move freely up and down without binding or sticking after each
adjustment