COMAND NTG 5.0 Main Connector - CAN wires Inform
1
4
5
8
9
12
13
15
16
2
4
3
2
1
2
1
CVBS IN
REAR CAMERA
REAR 12V OUT
GROUND
POWER / CAN
CAMERA IN
Rear-View Camera
Front-View Camera(or AVM)
LVDS OUT
DIP SWITCH
LVDS IN
8
7
6
5
4
3
2
1
MON CAN H
MON CAN L
PAS CAN H
PAS CAN L
BAT +
GROUND
REVERSE 12V IN
Pin # 12 = GND(Brown)
Pin # 15 = Battery POWER(Red)
Pin # 31 = PAS CAN LOW(Yellow)
Pin # 37 = PAS CAN HIGH(Yellow / White)
Pin # 32 = MON CAN LOW(Black)
Pin # 38 = MON CAN HIGH(Black / White)
*The wires color might be different depends on models.
You have to splice the CAN wires with each pins exactly.
*OEM CAN wires(High, Low) are twisted each other.
BAT+(Yellow)
REVERSE 12V IN(Orange)
(*Not necessary)
PAS CAN L(Green)
PAS CAN H(White)
GROUND(Black)
Monitor(OEM)
COMAND APS NTG 5.0 - Head Unit
(Blue
‘DISP port’)
(OEM LVDS Cable)
(Provided LVDS Cable)
17
23
22
28
29
35
34
40
※
OEM LVDS connector should be connected to
‘LVDS OUT’ port.
Provided LVDS connector should be connected to
‘DISP port’ of Head unit instead to OEM connector.
Installation Diagram
(If reverse gear is not detected via CAN data,
connect the power(12V) of the backup light)
R04-MB14
Rear View Camera Interface
MON CAN L(Green)
MON CAN H(White)
31
37
32
38
Car-solutions.com
www.car-solutions.com
