Car Solutions CS 9320, Руководство пользователя

Страница: 41 / 42

40
PIN 1=external navigation mute
PIN 2=rear camera trigger
5 . If you have touch screen, connect 4 ‐ pin touch cable to the 4 ‐ pin hole on the side of
navigation box.
Note: if you couldn’t see any image after you link RGB cable to the monitor, please
proceed the following steps:
1. Make sure that you connect AV cable well and USB mouse to adjust panel
setting and try again.
2. Enter your SD card with PC and find a file called, “
LCD93.inf.”
Then, key in the
right “resolution” and “panel,” save and insert SD card to CS9320 again.
with LCD93.INF:
When wrong resolution is selected, the image will disappear or become unstable.
Under this situation, please follow below steps to reset CS9320:
1. Get the file, “LCD93.inf” from your distributor
2. put the file into an empty 2G SanDisk SD card
3. insert the SD card into CS9320, and restart CS9320 3 to 5 times.
Reset CS9320
Note: If there is nothing appearing from monitor, please wait about 30 seconds and
power off/on CS9320 again.
4. Then you should have stable image again, please take out SD card and delete the
file.
Note: As long as the “LCD93.inf” file existed in SD card with CS9320, it will erase
the previous resolution setting.
LCD93.inf file:
www.car-solutions.com support@car-solutions.com
www.Car-Solutions.com