45929, EN - rev. 6, 2019-03
60
1. Select Point-To-Point (P2P) Standard measuring view from dropdown
menu.
2. Click on a Measuring view button to activate a specific view.
Active view is marked by a black frame.
3. Appropriate measuring arm information is shown in the information box
and in the measuring arm display.
4. Measure the distance highlighted in blue (A-B) or select another distance
in the table below the data sheet by clicking on that particular distance.
Register the value by pressing the “Target button”
.
5. Continue to measure the remaining distances in the view.
Register each distance by pressing the "Target” button.
6. Compare measured values to reference values and proceed to the next
measuring view, if required.
