45929, EN - rev.6, 2019-03
45
4.2.7
Center and measure the vehicle
In sections 4.4 - 4.7
you will find all the necessary information on how to
perform Centering and Measuring of the vehicle.
"Centering" is a method to calculate tilting of the vehicle, and is done in an
undamaged area of the vehicle. The area under the passenger compartment
is recommended.
The measuring method showed in this section is "Normal measuring",
for more information regarding "Normal measuring" and other measuring
methods,
see sections 4.4 – 4.7. See also section 5.5 The Measuring tab.
1. DataSheet view. Shows DataSheet, Workorder name and necessary
vehicle information.
2. Select "Parts In" or "Parts Out". Some points can be measured with any
of these two alternatives. This is indicated by a grey shadow behind the
adapter symbol. Click on the adapter symbol to toggle between
Parts In/Parts Out.
When the same
adapter dimensions
are required in both
ends of the measuring
arm, use the next
larger adapter
dimension on the
measuring point.
Parts In or Parts Out
A circle
around the adapter symbol
indicates that the point can be measured
without removal of parts. (Parts In).
A square
indicates that removal of
some parts may be necessary to measure
the point (Parts Out).
A grey shadow
behind the
adapter symbol indicates that the point
can be measured either with Parts In or
with Parts Out.
