B73 and B731 Clamping and Support systems
Car-O-Liner Group AB
50094, EN - rev. 0, 2020-03
13
3.3 Improvement of B34BR Bench Mounting
The B34 Bench Mounting are extended inwards by 20 mm [1].
The vertical center pillar is widened 40 mm for increased stiffness [2].
3.4 Reinforcement Plate for B34BR
The Reinforcement Plate B34-1 (part no 50254) [1] shall always be used on
wide anchoring with B250/B260 when the outer bracket [2] is wider than the
bend of the reinforcement plate,
see illustration below.
Remove washers [3] from the standard cam locks and from the bracket [4]
before tightening the reinforcement plate to the bench mounting.
1
2
4
1
2
3
50254
1
B34-1
