CAR-MON PRODUCTS, INC.
1225 Davis Road Elgin, IL 60123 Phone (847) 695-9000 Fax (847) 695-9078
INSTALLATION - OPERATION - MAINTENANCE
REMOVABLE
ENCLOSURE
DOWN
LIMIT
UP
LIMIT
CONTROL
WIRING
CHAIN & SPROCKET DRIVE
OPTIONAL
POWER
INPUT
LIMIT SWITCH ACCESS IS GAINED BY REMOVING PLUGS ON REMOVABLE ENCLOSURE
FIELD WIRING AND ADJUSTMENTS FOR TUBING STORAGE REEL
POWER OPERATED
LIMIT CONTROL ADJUSTMENTS
UP POSITION
1. TO INCREASE LENGTH TURN SCREW CCW.
2. TO REDUCE LENGTH TURN SCREW CW.
DOWN POSITION
1. TO INCREASE LENGTH TURN SCREW CCW.
2. TO REDUCE LENGTH TURN SCREW CW.
FIELD WIRING OF TSR-P REEL
The only field wiring that is required is power wiring to the electrical junction box mounted on the assembly, and the wiring
between the "UP/DOWN" push button station. (Furnished by Car-Mon Products) Please see wiring diagram.
NOTE: If hanging pendant option is supplied, the black & red wires are for the up control. The green & white wires are for the
down control.
(See photo detail of parts on next page)
Page 3
LIMIT SWITCH ADJUSTMENTS
1.
Run the reel to the end of travel for the side that needs to be adjusted (Run reel all the down, if you need to
change how far the tube hangs off the reel)
2.
Estimate length of change desired.
3.
Rotate the drum 2 full turns off the limit switch. This is crucial. If this is not done, it is possible to overdrive
the limit switch which can cause extreme damage to the drive assembly.
4.
Each quarter turn of the adjustment screw will result in approximately one foot of travel. It is advisable to
make several smaller adjustments rather than one large one. Working on one adjustment at a time will help
eliminate confusion.
5.
Once the desired change has been achieved, run the reel frm stop-to-stop several times to verify
repeatability.
6.
Replace black plug covers.