Version 14.06..2018
HW: LVDS
CI-VL2-PCM31
P
a
g
e
13
2.6.
Reconnection of the head unit’s housing parts
Clip in the head unit housing’s mounting locations and again fix the parts to the monitor by
using the 4 original Torx screws.
2.7.
Connection of the picture signal cable
Connect the picture signal cable’s female 20pin
c
onnector
„ BOX SIDE“
to the 20pin
connector of the video interface, with its contacting side in the UP position.
Take care for installing the picture signal cable in the right direction, as both connectors
seem to be identical. (Pay attention to the cable’s caption “
MONITOR SIDE
” and “
BOX SIDE
”)
