Version 16.02.2017
CI-RL2-N900
P
a
g
e
8
2.3.
Connecting video-interface and CAN-box
Connect the black female 6pin Micro-Fit connector of the PNP Power/CAN harness to
the male 6pin Micro-Fit connector of the CAN-box.
Note:
Check the LEDs on the CAN-box after reconnecting the battery-two must be on.
Connect the white female 6pin Molex connector of the 6pin to 12pin cable to the
male 6pin Molex connector of the video-interface.
Connect the black female 12pin Micro-Fit connector of the 6pin to 12pin cable to
male 12pin Micro-Fit connector of the CAN-box.
Note:
Check the LEDs on the video-interface after reconnecting the battery, one must
be on.
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given informations have to be
verified by the installer.
