Version 16.02.2017
CI-RL2-N900
P
a
g
e
13
2.5.3.
After-market Video source
Connect the female 6pin connector of the video cable to male 6pin connector of the
video-interface.
Connect the male video-RCA connector of the Video source to the yellow female RCA
port of the video-interface which is labelled as “Video IN2”.
2.5.4.
Audio Insertion
This interface is only able to insert Video signals in the vehicle’s infotainment. If an AV
source is connected, the Audio insertion has either to be done by the factory Aux input or a
special FM modulator. The inserted Video signal can parallel be activated to each Audio
modus of the factory infotainment.
2.6.
Connecting video-interface and keypad
Connect the female 4pin connector of the keypad to the male 4pin connector of the
video-interface.
