Version 03.05.2021
HW: BOT(V40)(V54)
CI-RL4-NAC12
P
a
g
e
7
1.5.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the 8 dip-switches at the
video-interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
*
The front camera will automatically be switched for 10, 15 or 20 seconds (adjustable) after
disengaging the reverse gear.
The camera power 12V will automatically be provided by the green wire
"Reverse-Out"
when the reverse gear is engaged, plus 10, 15 or 20 seconds delay for the front camera, and
also +12V when the front camera is manually selected by external keypad (see chapter "Power
Supply Output").
**
The display of the guidelines only works with simultaneous PDC display (Dip8 = ON).
After each Dip-switch-change a power-reset of the Can-box has to be performed!
Dip
Function
ON (down)
OFF (up)
1
AV1-R input
enabled
disabled
2
AV2-L input
enabled
disabled
3
V3 Front camera input
enabled
*
disabled
4
Input signal
Video sources
By trigger wires
By CAN
5
Rear-view cam type
after-market
factory or none
6
Guidelines
Enabled
**
disabled
7
No function
Set to OFF
8
Factory PDC
for after-market rear-
view camera
enabled
disabled
