Version 07.10.2021
HW: CAM(100)/(V50+V41)
CI-RL4-ELiNK
P
a
g
e
10
2.3.
Connection – picture signal cable
Connect the female picture signal cable’s
WATERBLUE
coloured HSD+2 connector to
the male
WATERBLUE
coloured HSD+2 connector of the video interface.
Disconnect the female 4pin HSD connector of the factory harness at the rear side of
the monitor and connect it to the male
PURPLE
coloured HSD connector of the
enclosed picture cable.
Connect the female
WATERBLUE
coloured
HSD connector of the enclosed 4pin HSD
picture signal cable to the previously become free male HSD connector at the
monitor’s rear side.
Caution: The picture signal cable has to be connected to the monitor.
Connection to the
head unit may cause damage to the system!
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer.
