Version 08.04.2021
HW: 1.8/1.9
CI-VL7-NBT2
P
a
g
e
2
Contents
1.
Prior to installation
1.1.
Delivery contents
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Connectors – video interface
1.4.
Settings of the 8 Dip switches
1.4.1.
Settings – dips1-3
1.4.2.
Settings – dips4-8
1.4.2.1.
Deviating dip-switch combinations for manual switching to after-market
camera (not via CAN-BUS)
1.4.3.
Explanation of the individual dipswitch functions
1.4.3.1.
Vehicle and monitor selection (Dip1-3)
1.4.3.2.
Activating the factory PDC display (Dip 4)
1.4.3.3.
Activating the video input (Dip 5+6)
1.4.3.4.
Activating the front camera input (dip 7)
1.4.3.5.
Rear view camera settings (dip 8)
2.
Installation
2.1.
Place of installation
2.2.
Connection schema
2.3.
Connection to factory head-unit and monitor
2.3.1.
Connection - picture signal cable
2.3.1.1.
Special case - space problems with the monitor connection
2.4.
Connection - Quadlock/CAN
2.5.
Connection - video-sources
2.5.1.
Audio insertion
2.5.2.
After-market front camera
2.5.3.
After-market rear-view camera
2.5.3.1.
Case 1: Interface receives the reverse gear signal
2.5.3.2.
Case 2: Interface does not receive the reverse gear signal
2.5.4.
Power supply output
2.6.
Picture settings in the menue
2.7.
Adjusting the dynamic guide lines
2.7.1.
By i-Drive buttons
2.7.2.
By touchscreen (only if supported)
3.
Interface operation
4.
Specifications
