Version 08.04.2021
HW: 1.8/1.9
CI-VL7-NBT2
P
a
g
e
18
2.6.
Adjusting the dynamic guide lines
The display of the dynamic guide lines does not work in all vehicles. The adjustment of the
dynamic guide lines does not work in all vehicles where the lines are displayed.
Note:
During the adjustment of guide lines, Dip-6 must be set to
ON
. To adjust the guide
lines,the reverse gear must be engaged. Move the steering wheel to see the changes.
2.6.1.
By i-Drive buttons
Press and hold the Menu button on the i-drive for 5 seconds.
Use the cursor keys "up"-"down"-"right"-"left" to move the guide lines in the
corresponding direction.
Press the i-Drive button to confirm the position.
In case of unchageable values, the system supports an automatical picture adjustment.
2.6.2.
By touchscreen (only if supported)
For vehicles with factory touchscreen, touch the display at any point for 20 seconds. Then
use the 4 arrow keys "up"-"down"-"right"-"left" to move the guide lines in the corresponding
direction as required.
