Version 26.02.2018
HW25 (V92)
CI-VL2-N902
P
a
g
e
9
2.3.
Connecting video-interface and CAN-box
Connect the black female 8pin Micro-Fit connector of the PNP Power/CAN harness to
the male 8pin Micro-Fit connector of the CAN-box.
Note: Check the LEDs on CAN-box after reconnecting the battery, two must be on.
Connect the white female 6pin Molex connector of the 6pin to 12pin cable to the
male 6pin Molex connector of the video-interface.
Connect the black female 12pin Micro-Fit connector of the 6pin to 12pin cable to
male 12pin Micro-Fit connector of the CAN-box.
Note: Check the LEDs on the video-interface after reconnecting the battery, one must
be on.
Connect the red cable of the PNP Power/CAN harness to to a s12V accessory
power supply.
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer.
