Version 26.02.2018
HW25 (V92)
CI-VL2-N902
P
a
g
e
5
1.3.2.
CAN-bus box
The CAN box reads the vehicle’s digital signals out of the vehicle’s CAN-bus and converts
them for the video interface.
1.3.2.1.
Dip-switch settings
Some settings must be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
1.3.2.2.
Enabling the interface’s video inputs (dip 1-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs. So the disabled inputs will be
skipped while switching through the video interfaces inputs.
Dip
Function
ON (down)
OFF (up)
1
RGB-input
enabled
disabled
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
RGB-input resolution
VGA 800x480
RGB NTSC
400x240 or 480x240
5
Rear-view cam type
after-market
factory or none
6
Monitor
selection
Try all possible combinations of dips 6-8 to find
the best picture (quality and size)
7
8
