CAR-connect LDC.22-500, Руководство по эксплуатации

Страница: 37 / 56

Operation
41.CC.2210.3042_BA_V00_EN 37
5.6.3 Main menu
From the main menu, press function keys F2 to F4 to access the following submenus.
Exit the submenu by pressing function key F1 (exit).
Function
key
Assignment Function
F2 Display the operating parameters. The operating
parameters are used to monitor the charging process
(see the “Operating parameters” section).
F3 Display the configuration parameters. You can adjust
the parameters in this area (see the “Configuration
parameters” section).
F4 Displays the information parameters (see the
“Information parameters” section).
5.6.4 Operating parameters
The “
Operating parameters
” submenu displays the current parameters for the charging
process. The parameters are sequentially numbered and are explained in the following
table.
1. Navigate through the parameters by pressing function keys F2 (down) and F3 (up).
2. Exit the parameter menu by pressing function key F1 (exit).
Parameter Values Meaning Unit
Charging
time
Act The elapsed charging time min.
End The remaining charging time
SOC
(State of
Charge)
Set State of charge at which the charging process
is terminated
%
Act Current state of charge
Power Max Maximum output power of the high-voltage DC
charger
kW
Act Current output power of the high-voltage DC
charger
Counter Amount of energy delivered during the
charging process
kWh
Electrical charge delivered during the charging
process
Ah
Protocol Displays the charging communication protocol
used