USE AND CARE INSTRUCTIONS
20
5.
8.
7.
9.
6.
Set Control Knobs to OFF and open the LP Gas tank valve
SLOWLY 1/4~1/2 of a full turn
. For Natural Gas open the
Shut Off Valve at source.
Push and turn Right Main Burner Control Knob to
IGN
.
Immediately press the Electirc Ignitor Button for up to
3-4 seconds to light the burner.
If ignition does not occur in 5 seconds, turn the Burner
Control(s) off, wait 5 minutes, and repeat the lighting
procedure. If ignition still does not occur, turn the burner
control(s) and gas source OFF. Wait 5 minutes for gas to
clear and then conduct a leak test of ALL gas connections
and gas sources as explained in the Use and Care section
of this manual. If no leaks are detected, wait 5 minutes for
any gas to clear and repeat the lighting procedure.
After one Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
Turn each other burner knob to HI to light individually.
Note: When lighting all main burners, start with the burner
furthest from fuel source location, then light remaining
burners in sequence moving toward fuel source.
Failure to replace a faulty hose, secure gas supply
connections or to open the Lid before proceeding to
the Lighting Procedures could result in a fire or
explosion that could cause serious bodily injury,
death, or property damage.
WARNING
!
!
Main Burner Lighting Instructions
1.
(for Models BCC3B14ALP/NG )
(for Models BCC5B14ALP/NG)
Before each use, check all hoses for cracks, nicks, cuts,
burns or abrasions. If a hose is damaged in any way, do
not use your grill before replacing the hose with an
authorized part from the Parts List. Also make sure all
gas supply connections are securely tightened.
Familiarize yourself with all Safety and Use and Care
instructions in this manual. Do not smoke while
lighting your grill or when checking the gas supply
connections.
Be sure that the LP Gas tank is filled, and lock
Casters to prevent movement during grill operation.
Open the Grill Lid.
4.
3.
2.
Side Burner Lighting Instructions
Follow steps 1 through 5 of the Grill Lighting
Instructions.
Push and turn Control Knob to
IGN/HIGH
.
The built-in spark ignitor will light the burner auto-
matically.
You may have to push and turn the control knob up to
3 or 4 times to light.
If ignition does not occur in 5 seconds, turn the Burner
Control(s) off, wait 5 minutes, and repeat the lighting
procedure. If ignition still does not occur, turn the
burner control(s) and gas source OFF. Wait 5 minutes
for gas to clear and then conduct a leak test of ALL gas
connections and gas sources as explained in the
Use and Care section of this manual. If no leaks are
detected, wait 5 minutes for any gas to clear and
repeat the lighting procedure.
After Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
1.
5.
3.
4.
2.
6.
Open LP Gas tank
OFF
IGN/HIGH
LOW
Manually Lighting Your Grill By Paper Match
To light your gas grill by match, insert a match into the
Lighting Stick and follow steps 1 through 5 of the Grill
Lighting Instructions. Then, light the match and place
Lighting Stick through the Cooking Grids on the grill (See
Diagrams Below) to light the main/sizzle burners. Turn
the correlated Control Knob to the HI setting to release
gas. The Burner should light immediately.
Main Burner
Main Burner
(Sizzle)
Main Burner
Main Burner
OFF
LOW
IGN/SIZZLE
HIGH
Main Burner
(Sizzle)
Main Burner
OFF
OFF
OFF
OFF
Match
Lighting Stick
SIZZLE