11
Assembly Instructions for BCC3B14ALP/NG & BCC5B14ALP/NG
CAUTION
: Even though it is possible for one person to install this grill, it is better to obtain assistance from another
person when handling the large, heavy pieces.
Install Casters
Open lid of shipping carton and remove packing materials. Lay a piece of cardboard on the ground. With the
help of your assistant, lift and lay the grill on the cardboard carefully as shown.
Install two Casters with brake to the Cart Seat on the left side of cart bottom. And install two Casters without
brake to the Cart Seat on the right side of the cart bottom using twelve(12) Plain Washers, Spring Washers and
Phillips Head Screws M6X15(three for each Caster) and tighten the screws securely using the screwdriver
provided.
With your assistant, stand the grill up carefully.
1
Install Side Shelf and Side Burner Frame
2
Loosen the two pre-installed screws on both sides of Right Bowl Side Panel half way.
Attach the Side Burner Frame to the Right Bowl Side Panel by matching the slotted holes on the
Side Burner Frame into the half way screws on the Right Bowl Side Panel. Press the Side Burner
Frame downwards until it rests in place. Next, attach 3 Phillips Head Screws M6X15(See "CC"). Do
not tighten the screws until the middle screw is attached.
Align the one middle hole on the edge of the Side Burner Frame with the middle hole on the Right
Bowl Side Panel. Insert the 1 Phillips Head Screw M6X28(See "DD") from inside of the grill bowl
and tighten securely.
Tighten all the screws securely using the screwdriver provided.
Repeat the same procedures for the Side Shelf.
Cart Seat
Caster with
brake
Side Burner Frame
Side Shelf
pre-installed
s c r ew
Plain W asher
Qty. 12
Part # S411M06161
Spring W asher
Qty. 12
Part # S431M06091
Phillips Head Screw
M6X15
Qty. 12
Part # S112M0615A
(AA)
(BB)
(CC)
(CC)
Phillips Head Screw
M6X30
Qty. 2
Part # S112M0630A
(DD)
Phillips Head Screw
M6X15
Qty. 6
Part # S112M0615A