T) Programming
The Z5/Z6 provides programming, maintenance and look-up
functions. For details see chapter 26 in the Operating
Instructions.
COFFEE READY
Push and hold the Rotary Dial until the Display shows
FILTER
. Turning the dial clockwise lets you access the func-
tions listed below. To get back to
COFFEE READY
turn until
the display shows
EXIT
and push the Rotary Dial. If you want
to get into a function, push the Rotary Dial again, and sub-
functions will appear. Turning the Dial will show you different
options within the sub-functions.
Function
• Sub-functions Comment
FILTER NO
•
FILTER YES
Install and activate the Clearyl Filter
•
FILTER NO
HARDNESS 10º DH
When not using the Clearyl cartridge,
• Not active or
set the hardness to your water.,
• Six hardness levels
See chapter 24 Operating Instructions.
MAINTENANCE
•
RINSE UNIT
Allows you to run extra cleaning
•
CAPPUCCINO
cycles, even if the Z5/Z6 does not
CLEANING
prompt you to do so.
•
CHANGE FILTER
•
CLEAN UNIT
•
CAPPUCCINO
RINSING
•
DECALCIFY UNIT
TEMPERATURE
•
LOW
Change the temperature for each
•
NORMAL
coffee button, see chapter 26.2
•
HIGH
Operating Instructions
AROMA
•
XMILD
Change the coffee strength for
•
MILD
each coffee button. The amount of
•
NORMAL
ground coffee varies between approx.
•
STRONG
5 and 16 grams.
•
XSTRONG
CAPPUCCINO
Change the pre-sets without brewing.
MILK
Change the pre-sets without brewing
ENERGY
•
SAVE NO
NO: Z5/Z6 is always ready
•
SAVE LEVEL 1
Level 1: heats up for steam
•
SAVE LEVEL 2
Level 2: heats up for water and steam
TIME
Set actual time
