background image

Instruction manual ZC622 ZC922

6

Please keep this instruction manual for future reference 

 

-

The air must not be discharged into a flue that is used 

for exhausting fumes from appliances burning gas or 

other fuels.

 

-

Regulations concerning the discharge of air have to be 

conformed to.

 

-

Do not flambé under the cooker hood.

 

-

Never leave frying pans unattended during use as over-

heated fats and oils may catch fire.

 

-

To ensure the best performance, we recommend 

switching on the extractor 15 minutes before cooking 

and leave it running 15 minutes after. This will ensure 

that the air in the kitchen is being circulated before 

cooking commences and the air is being cleaned after 

cooking has finished.

 

-

The performance of your extractor will vary depending 

on a number of factors. These include type of extraction, 

room volume, length of ducting, ventilation available and 

the cleanliness of the filters.

 

-

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety.

 

-

Children should be supervised to ensure that they do not 

play with the appliance.

 

-

Cleaning and user maintenance must not be made by 

children without supervision.

Содержание ZC622

























Отзывы: