Caple Wi6224, Техническая информация

Страница: 17 / 19

12
4 >
．
Unplug all the connecters, then press the head of each of the four plastic studs (4) one by one, and
move up-ward the control board, remove the control board, and replace it with the new module.
See
。
( Fig. 11)
5 >
．
Replace the LED display board. Unplug the four 4 display cover fasteners on display board supporter
（
8
）
as per arrowhead direction, and then remove the display board, and its two connectors from
both sides, Replace the display board. See ( Fig. 11 & Fig. 12)
○
The name and explanation of the main PCB board connectors (Fig. 12)
X7: To right zone sensor(yellow)
X8: To left zone sensor(white)
X9: To right zone fan(yellow)
X3: To left zone fan(white)
X11
、
X12: To left zone display PCB
X13
、
X14: To right zone display PCB
X15: To LED light (red)
X16: To power PCB
Fig. 11
Fig. 12