Instruction manual WDU125
18
Please keep this instruction manual for future reference
I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N S :
A. Drill a hole of 33mm to 35mm into the sink or worktop where the Actuator Button (1) is to
be placed.
B. Insert, from the top, the Actuator Outlet (3) through the drilled hole and secure by tightening
the Actuator Nut (2).
C. Firmly connect Air Tube (4): one end to the Actuator Outlet (3) and one end to
Sensor Inlet (5).
D. Plug Disposer Power Cord (6) into main electrical service.
E. The Air Switch is supplied in the off position. To turn on the disposer, press Actuator Button (1).
To turn off, press Actuator Button again.
F. For use with the wall switch - first plug the disposer power cord into the outlet controlled by
the wall switch. Then install the tube and actuator button on the disposer and press the button
to place the air switch in the “on” position. Note: The disposer will turn on at this time. Then,
remove the tube and button. The disposer can now be controlled with the
wall switch.
