Caple WC6400 Скачать руководство пользователя страница 5

Страница: 5 / 13

Instruction manual WC6400 & WC6410

Please keep this instruction manual for future reference

WA R N I N G :
I N C O R R E C T E A RT H I N G C A N R E S U LT I N T H E R I S K O F E L E C T R I C S H O C K

AT T E N T I O N

Store wine in sealed bottles.

Do not overload the cabinet.

Do not open the door unless necessary.

Do not cover shelves with aluminium foil or any other shelf material which may prevent air
circulation.

Should the wine cabinet be stored without use for long periods it is suggested, after careful
cleaning, to leave the door ajar to allow air to circulate inside the cabinet in order to avoid
possible formations of condensation, mould or odours.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the storage compartments of the appliance, unless they
are the type recommended by the manufacturer.

I N S TA L L AT I O N

B E F O R E U S I N G YO U R W I N E C A B I N E T

Remove the exterior and interior packing.

IMPORTANT

: Before connecting the wine cabinet to the power source, let it stand upright for

at least 12 hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.
Before installation, turn the unit off and unplug it from the outle

N OT E

To protect the appliance in transit and delivery the door is packed tightly against the cabinet.
When first installed this can mean the door seal appears thinner on one side of the door due to
compression, this is normal and once out of the box it will relax over a short period of time and
the door will return to the normal position. If you wish to speed up the process you can gently
warm the seal with a hair dryer on a low temperature setting. This can help relax the seal helping
it return to normal thickness a little faster.

I N S TA L L AT I O N O F YO U R W I N E C A B I N E T

This appliance uses flammable refrigerant. Never damage the cooling pipework during
transportation.

Locate the wine cooler away from direct sunlight and sources of heat (ovens, hobs, heaters,
radiators, etc.). Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion. When disposing your appliance, please choose an authorized disposal site.

Avoid locating the unit in moist areas.

It is fitted with a power cord having an earth wire terminating in a 13amp plug.

Ensure the product is correctly ventilated (see page 16).

Consult a qualified electrician or service engineer if the earthing instructions are not completely
understood.

Plug the wine cabinet into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) pin from the plug. Any questions concerning
power and/or grounding should be directed toward a certified electrician or Caple service.