Instruction manual WC1800
6
7
Please keep this instruction manual for future reference
Instruction manual WC1800
Please keep this instruction manual for future reference
I N S TA L L AT I O N W A R N I N G S
B E F O R E U S I N G YO U R W I N E C A B I N E T:
› Remove the exterior and interior packing.
›
IMPORTANT:
Before connecting the wine cabinet to the power source, let it stand upright
for at least 12 hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
› Before installation, turn the unit off and unplug it from the outlet.
Clean the interior surface with lukewarm water using a soft cloth.
NOTE
To protect the appliance in transit and delivery the door is packed tightly against the cabinet.
When first installed this can mean the door seal appears thinner on one side of the door due to
compression, this is normal and once out of the box it will relax over a short period of time and
the door will return to the normal position. If you wish to speed up the process you can gently
warm the seal with a hair dryer on a low temperature setting. This can help relax the seal helping
it return to normal thickness a little faster.
I N S TA L L AT I O N O F YO U R W I N E C A B I N E T:
› The wine cabinet should be installed in a stable and suitably sized kitchen carcass, which has
been appropriately levelled and ventilated.
› To level your wine cabinet, adjust the front levelling leg at the bottom of the cabinet.
› Ensure it is perfectly level, as this will minimise any vibrations.
› This appliance uses flammable refrigerant. Never damage the cooling pipework
during transportation.
› Locate the wine cooler away from direct sunlight and sources of heat (ovens, hobs, heaters,
radiators, etc.). Never clean appliance parts with flammable fluids as the fumes can create a fire
hazard or explosion. When disposing of your appliance, please choose an authorised
disposal site.
› Avoid locating the unit in moist areas.
› It is fitted with a power cord having an earth wire terminating in a 13amp plug.
› Ensure the product is correctly ventilated (see page 16).
