manualshive.com logo in svg

Caple SP612, Инструкция по эксплуатации, Страница: 18 / 20

Поделиться
Скачать
Caple SP612 Скачать руководство пользователя страница 18

Instruction manual SP612 / SP912 

18

Please keep this instruction manual for future reference 

T R O U B L E S H O OT I N G

FAU LT

C AU S E

S O L U T I O N

The lights on, but the fan 

does not work.

The fan blade is jammed.

Switch off the unit and contact Caple Service. To 

be repaired by qualified service personnel only.

The motor is damaged.

The lights and fan do not 

work.

A blown fuse.

Replace the fuse.

The power cord is loose.

Plug in to the power supply again.

Serious vibration of the 

unit.

The fan blade is damaged.

Switch off the unit and contact Caple Service. To 

be repaired by qualified service personnel only.

The fan motor is not fixed tightly..

Switch off the unit and contact Caple Service. To 

be repaired by qualified service personnel only.

The unit is not hung correctly on the 

bracket.

Take down the unit and check whether the 

bracket is in the correct location.

The extraction 

performance is not good.

The filter requires cleaning.

Clean the grease filter as directed in the ‘Care 

and maintenance’ section. Replace the charcoal 

filter (if in recirculation mode).

If the above table has not solved the problem please contact Caple Service by phone on  

0117 938 7420

 or by email

 [email protected]

Содержание SP612





















Отзывы:

Нет отзывов