Instruction manual SP612 / SP912
10
Please keep this instruction manual for future reference
I N S TA L L AT I O N
P R E PA R E F O R T H E I N S TA L L AT I O N :
If you have an outlet to the outside, your cooker hood can be connected
as per the below picture by means of an extraction duct with an interior
diameter of 150mm.
Before installation, turn the unit off and unplug it from
the outlet.
The cooker hood should be installed so that there is a space
of 650-760mm from the centre of the mesh grease filters to the
hob (435-545mm from the bottom of the hood to the hob). It is the
manufacturer of the hob who determines the clearance required and
the clearance quoted by the hob manufacturer must be followed. In
the absence of any instructions supplied with a gas hob the minimum
distance between the hob and the centre of the mesh grease filters must
be at least 760mm.
4
435-545mm
650-760mm
4
Earthed Outlet Box
Earthed Plug
Earthed Outlet
4
