22
Please keep this instruction manual for future reference
Instruction manual INCH
T R O U B L E S H O OT I N G
FAU LT
S O L U T I O N
Light bulb doesn’t come on
A replacement may be necessary, but first check the extractor is connected to
the power supply and switched on. If a replacement is needed remember to
disconnect power supply before removing the bulb.
The motor is on but fan doesn’t
seem to be as efficient as usual
Check grease filter, if it has not been cleaned recently, it might be clogged with
grease. If filter is relatively clean, check charcoal filters. If this has not been
replaced for more than six months. Remove and insert new a one.
As charcoal filters clog in just the same way as the grease filter, thereby reducing
the efficiency of both the fan and the filter itself.
Works normally but cooking
smells linger
If you’re using the unit in re-circulation mode, change charcoal filter. It may be
past its prime. Also ensure you switch the extractor on 15 minutes before cooking
and leave it running for at least 15 minutes after you finish. This will help clear
the cooking odours more efficiently.
Controls fail to switch motor on
Check plug/electrical supply, socket and fuse. If these are in order and fault
persists, it could be that an accumulation of grease has impaired the efficiency
of the switch mechanism. Try rapidly moving switch on and off several times in
succession to clear grease deposit. If fault continues, contact Caple service on
0117 938 7420 or email [email protected].
Appliance does not work at all
Check your extractor is switched on at the mains. Next, check for an unexpected
power outage by switching on adjacent lights etc. If all is in order, contact Caple
Service on 0117 9387420 or email [email protected].
Still not working?
Call the service agent
If, having consulted the above diagnostic chart you are still unable to remedy the
situation, please call Caple service on 0117 938 7420 or email
If the above table has not solved the problem please contact Caple Service by phone on
0117 938 7420
or by email
