Caple DOMINO C621 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 18

Caple DOMINO C621 Скачать руководство пользователя страница 2

Page 2

C621 C721 user manual.DOC

The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription

errors in this booklet. The manufacturer reserves the right to make all modifications to its products

deemed necessary for manufacture or commercial reasons at any moment and without prior notice,

without jeopardising the essential functional and safety characteristics of the appliances.

Dear Customer

Thank you for purchasing our product. The safety precautions and recommendations
reported below are for your own safety and that of others. They will also provide a means

by which to make full use of the features offered by your appliance.
Please preserve this booklet carefully. It may be useful in future, either to yourself or to

others in the event that doubts should arise relating to its operation.

This appliance must be used only for the task it has explicitly been designed for,

that is for cooking foodstuffs. Any other form of usage is to be considered as

inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the event of damage caused by

improper, incorrect or irrational use of the appliance.

IMPORTANT PRECAUTIONS AND RECOMMENDATIONS

•

After having unpacked the appliance, check to ensure that it is not damaged. If you

have any doubts, do not use it and consult your supplier or a professionally qualified
technician.

•

Packing elements (i.e., plastic bags, polystyrene foam, nails, packing straps, etc.) should

not be left around within easy reach of children, as these may cause serious injuries.

•

The packaging material is recyclable and is marked with the recycling symbol

•

Do not attempt to modify the technical characteristics of the appliance as this may

become dangerous to use.

•

The manufacturer cannot be considered responsible for damage caused by unreasonable,

incorrect or rash use of the appliance.

•

If you should decide not to use this appliance any longer (or decide to substitute with a

newer  model), before  disposing  of it, it is recommended that it be made inoperative  in an
appropriate  manner  in  accordance  to  health  and  environmental  protection  regulations,
ensuring  in  particular  that  all  potentially  hazardous  parts  be  made  harmless,  especially  in

relation to children who could play with old appliances.

•

The appliance should be installed and all the gas/electrical connections made by a

qualified engineer in compliance with local regulations in force and following the

manufacturer's instructions

TIPS FOR THE USER

•

During and after use of the cook top, certain parts will become very hot. Do not touch

hot parts.

•

Keep children away from the cooking hob when it is in use.

•

After use, ensure that the knobs are in position • (off), and close the main gas delivery

valve or the gas cylinder valve.

•

In case of difficulty in the gas taps operation, call Service.

•

Before any cleaning or maintenance, switch off the electricity to the cook top.

«
1
2
3
4
...
»

Содержание DOMINO C621



















Отзывы:

Нет отзывов