Caple DD925CO, Инструкция по эксплуатации

Страница: 21 / 28

Instruction manual DD925CO 21
Please keep this instruction manual for future reference
L E A R N I N G T H E N E W T R A N S M I S S I O N C O D E
Once the transmission code is changed in the remote control unit, the electronic central unit of the
cooker hood must be made to set the new code in the following way:
Press the main power-off button on the hood and then restore power to the electronic control
unit. Within the next 15 seconds, press the Light Button to synchronise the central unit with
the code.
WARNING:
The battery should be replaced every year to guarantee the optimal range of the transmitter. To
replace the battery, take the plastic lid off, remove the battery and replace it with a new one,
observing the correct battery polarities. Used batteries should be discarded in special
collection bins.
T I M I N G
› This product is equipped with intelligent electronics which include a timer device for speed
controls when the air capacity exceeds 650m³/h. Internal motor models, with maximum air
capacity higher than 650m³/h, are equipped with a timer device that automatically switches
the speed from 4th to 3rd speed, after 6 minutes operation.
› External motor models are equipped with remote motors that, as for internal motor versions,
include a timer device that switches down the speed when it exceeds 650m³/h. (See
External Motors Instructions). Remote motors, whose air capacity exceeds 650m³/h at both
4th and 3rd speed, will have the following by default timer control functions: The speed is
automatically switched from 4th to 2nd speed, after 6 minutes operation.
› If the appliance is working at 3rd speed, it is automatically switched to 2nd speed, after
7 minutes operation. Operation speeds can also be changed during operation. The energy
consumption of the appliance in standby mode is lower than 0.5W.