Caple DD925CO, Инструкция по эксплуатации

Страница: 13 / 28

Instruction manual DD925CO 13
Please keep this instruction manual for future reference
H OW TO U S E T H E E X T R AC TO R
This appliance is intended to suck cooking fumes, greases and some steam. It has been designed
to work in both ducted mode, with outside evacuation, and recirculating mode.
O U T S I D E - D U C T E D V E R S I O N
The cooker hood can be mounted in the version with outside discharge of extracted air: in this
case it is necessary to connect the exhausting channel/ducting to the outside (exhausting pipes are
not supplied with this product).
Check for a non-return valve blockage
WARNING:
Before connecting the air exhaust hose, make sure that the non-return valves can move freely.
EN
HOW TO USE THE COOKER HOOD
This appliance is intended to suck cooking fumes,
greases and steam. It has been designed to work
in both suctioning mode, with outside evacuation,
and filtering mode.
Outside - discharge version
The cooker hood can be mounted in the version
with outside discharge of suctioned air: in this case
it is necessary to connect the exhausting channel
to the outside (exhausting pipes are not supplied
with the products.)
Non-return valve blockage
In case of outside air discharge installation, fit a
non-return valve to prevent wind and back air from
entering.
Before connecting the air exhaust hose, make
sure that the non-return valves can rotate fre-
ely.
WARNING
Recirculation mode
In case fumes and vapour cannot be
evacuated outside, the appliance can be used in
recirculation mode.
Activated charcoal filters are required for this type
installation. To purchase the Charcoal filters
please visit www.caple.co.uk, or call our sales
office on 0117 938 1900.
Air recycled through the charcoal filters is recircu-
lated back into the kitchen, thanks to a vent
conveying the air in the cabinet and kitchen plinth
(Fig. 11) .
CAUTION
WARNING
Removing/installing the grease and charcoal
filters
The removal and fitting of the grease and
charcoal filters need to be carried out with the
downdraft in the upright/open position. To open
the downdraft, push the key.
Remove the metal grease filters, which are
magnetically secured to the appliance, by using
either a hand tool or a knife edge. Using the slot
found in the filter sides, as shown in
Fig. 9
.
The charcoal filter is installed directly on the
back of the grease filter
(see Fig. 12)
. Charcoal
filters shall be replaced accordingly to the
effective use of the Downdraft, and in any
case at least once every 6 months.
7
After having replaced the charcoal filters,
ensure the front stainless steel panel is re-
applied, otherwise the downdraft will not be
able to function
Installation must comply with the regulations
in force regarding the ventilation of enclosed
environments. In particular, discharged air
must not be conveyed into a duct used for
fumes discharge or discharge from
appliances using gas or other combustible
materials. The use of discontinued ducts is
not allowed without the approval of a
qualified technician.