15
b) grill burner
– Unscrew and remove the burner securing screw ‘C’ (fig. 3.8).
– Slacken screw ‘D’ (fig. 3.8).
– Move the burner in the manner shown in figure 3.9.
Take care not to damage the wire to the ignition electrode and the safety valve probe.
– Using a 10 mm box spanner, unscrew the injector (indicated by the arrow in fig. 3.9)
and replace with a new injector selected in accordance with the “TABLE FOR THE
CHOICE OF THE INJECTORS”; then replace the burner repeating the above steps
in reverse order.
Fig. 3.9
Fig. 3.8
C
D
