33
Gas tap
If a tap becomes stiff, do not force; contact your local Service Centre.
Flexible tube
From time to time, check the flexible tube connecting the gas supply to the cooker.
It must be always in perfect condition; in case of damage arrange for it to be replaced
by a suitably qualified and registered person.
Enamelled parts
All the enamelled parts must be cleaned with a sponge and soapy water or other non-
abrasive products.
Dry preferably with a microfibre or soft cloth.
Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the enamel
if left too long.
Stainless steel, aluminium parts and silk-screen printed
surfaces
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT
: these parts must be cleaned very carefully to avoid scratching and abra-
sion. You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents as these
will irreparably damage the surface.
Replacing the oven light bulb
Switch the cooker off at the mains
.
When the oven is cool unscrew and replace the bulb with another one resistant to high
temperatures (300°C), voltage 230 V (50 Hz), E14 and same power (check watt power
as stamped in the bulb itself) of the replaced bulb.
Note
: Oven bulb replacement is not covered by your guarantee.