Instruction manual CM123 & CM123BK
18
19
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual CM123 & CM123BK
P R E PA R E T H E C A B I N E T:
Read the instruction on the bottom of cabinet template, put the template on the bottom plane
of cabinet.
2. Make the marks on the bottom plane of cabinet according to marks"a" of
a
a
CENTER LINE
FRONT EDGE
LEFT EDGE
T EDGE
RIGH
3. Remove the bottom cabinet template and fix the bracket w
ith screw A.
a
a
Screw A
Bracket
Centre line
Make the marks on the bottom plane of cabinet according to marks”a” of the template.
Remove the bottom cabinet template and fix the bracket with screw A.
Bracket
Screw A
B U I LT I N F U R N I T U R E
N O T E :
The fitted cabinet the appliance is being installed into must not have a back wall behind
the appliance. A gap must be maintained between a wall and the base of the unit above. Specific
gap size can be referenced by the diagrams.
Minimum installation height: 85cm
W A R N I N G :
Do not cover a ventilation slot or air intake points.
(min)
500mm
450mm
600mm
+8
+2
560mm
45mm
45mm
850mm
