background image

Instruction manual C995i

30

Please keep this instruction manual for future reference 

FA I L U R E   D I S P L AY   E R R O R   C O D E S 

The induction hob is equipped with a self diagnostic function. With this test the technician is able 
to check the function of several components without disassembling or dismounting the hob from 
the working surface.

 

The above are the judgment and inspection of common failures. 

Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction 
hob. Caple Service can be contacted by telephone on 0117 938 1900.  

P R O B L E M

P O S S I B L E   C A U S E S

W H AT   TO   D O

F1-F6

Temperature sensor failure.

Please contact Caple service

F9-FA

Temperature sensor of the IGBT failure.

Please contact Caple service

FC

The connection between the display board 
and the main board has failed

Please contact Caple service

E1/E2

Abnormal supply voltage

Please inspect whether power supply is 
normal. Power on after the power supply is 
normal.

E3/E4

Temperature sensor of the ceramic glass 
plate Is high

Please restart after the induction hob cools 
down.

E5

Temperature sensor of the IGBT Is high

Please restart after the induction hob cools 
down.

Содержание C995I

































Отзывы: