Instruction manual C892C 17
Please keep this instruction manual for future reference
TO L O C K T H E C O N T R O L S
Touch the lock control, the timer will then display ‘Lo’
TO U N L O C K T H E C O N T R O L S
Make sure the hob is turned on.
Touch and hold the keylock control
for 5 seconds.
U S I N G T H E T I M E R
You can use the timer in two different ways:
»
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up.
»
You can set it to turn one cooking zone off after the set time is up.
»
The timer maximum is 99 minutes.
U S I N G T H E T I M E R A S A M I N U T E M I N D E R
Make sure the hob is turned on and a heating zone is in use.
Touch the “ “ or the “ “ controls of the timer. The minute minder indicator will flash.
Set the time by touching the “ “ or “ ” controls. The minute minder indicator
will start flashing and will show in the timer display.
Touch the “ “ or “ “control of the timer once to decrease or increase the time by
1 minute.
Touch and hold the “ “ or “ ” control of the timer to decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
Touching the “ “ and “ “ together, the timer is cancelled and the “
” will show in the minute display.
When the time is set, it will begin to count down immediately. The display will show
the remaining time and the timer indicator will flash for 5 seconds.
A buzzer will sounds for 30 seconds and the timer indicator will show “ ” when the
timer has finished.
9
4. Select a heat setting by touching the “-“ or
“+” control.
• If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off
2. Turn the cooking zone off by scrolling down to “ 0 “ or touching “-“ and
”+” control together.
3. Turn the whole cooktop off by touching the ON/OFF
control.
13
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
4. Touching the “-“ and “+” together , the timer is cancelled, and the display will
show ”--” in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
timer is set, you have to start from step 1
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
13
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
4. Touching the “-“ and “+” together , the timer is cancelled, and the display will
show ”--” in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
timer is set, you have to start from step 1
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
13
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
4. Touching the “-“ and “+” together , the timer is cancelled, and the display will
show ”--” in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
timer is set, you have to start from step 1
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
13
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
4. Touching the “-“ and “+” together , the timer is cancelled, and the display will
show ”--” in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
timer is set, you have to start from step 1
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
13
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
4. Touching the “-“ and “+” together , the timer is cancelled, and the display will
show ”--” in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
timer is set, you have to start from step 1
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
13
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
4. Touching the “-“ and “+” together , the timer is cancelled, and the display will
show ”--” in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
timer is set, you have to start from step 1
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
