Instruction manual C892C
14
Please keep this instruction manual for future reference
5
U S I N G YO U R C E R A M I C H O B
TO S TA RT C O O K I N G
When the power to the hob is turned on, the buzzer sounds once, all
the indicators light up for 1 second and then go out, indicating that the
ceramic hob has entered standby mode.
To turn on touch the ON/OFF control . All the indicators then
show “ “.
Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone
are clean and dry.
Touch the heating zone selection control.
Select a heat setting by touching the “ “ or “ ” control.
If you do not choose a heat setting within 1 minute, the ceramic hob will
automatically switch off. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
8
Using your Ceramic Hob
To start cooking
• After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.
1. Touch the ON/OFF control. all the indicators
show “-“
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control
9
4. Select a heat setting by touching the “-“ or
“+” control.
• If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off
2. Turn the cooking zone off by scrolling down to “ 0 “ or touching “-“ and
”+” control together.
3. Turn the whole cooktop off by touching the ON/OFF
control.