5
Take care not to damage the hob
Raw pan bottoms or damaged saucepans (not enamelled cast iron pots,) may damage the
ceramic glass.
Sand or other abrasive materials may damage ceramic glass.
Avoid dropping objects, even little ones, on the vitroceramic hob top.
Do not hit the edges of the glass with saucepans.
Make sure that the ventilation of the appliance is according to the instructions detailed in this
manual.
Do not put or leave empty saucepans on the induction hob.
Sugar, synthetic materials or aluminium sheets must not contact with the heating zones. These
may cause breaks or other alterations of the glass by cooling: switch off the appliance and take
them immediately out of the hot heating zone (be careful: do not burn yourself).
Never place any hot containers over the control panel.
If a drawer is situated under the embedded appliance, make sure the space between the
contents of the drawer and the underside part of the appliance is large enough (a minimum
space of 2cm). This is essential to ensure correct ventilation.
Never put any inflammable object (for example sprays) into the drawer situated under the
induction hob. If cutlery drawers are used they must be resistant to heat.
In case of appliance failure
If a defect is noticed, switch off the appliance and turn off the electrical supplying.
If the ceramic glass is cracked or damaged, you must unplug the appliance and contact Caple
service.
Repairs must be carried out by specialists. Do not attempt repairs by yourself.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric
shock.
Other information
Ensure sure the pan is always centred on the cooking zone. The bottom of the pan must cover
as much of the cooking zone as possible.
For the users with a pacemaker, the magnetic field could influence its operation. We
recommend getting information from the retailer and your doctor before use.
Do not use aluminium or synthetic material sauce pans ad they could melt on hot cooking zones.
THE USE OF EITHER POOR QUALITY POTS OR ANY INDUCTION ADAPTOR PLATE FOR
NON-MAGNETIC COOKWARE RESULTS IN A WARRANTY BREACH.
IN THIS CASE, THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY
DAMAGE CAUSED TO THE HOB AND/OR ITS ENVIRONMENT.
