4
A
utomatic saucepan
detection
Your induction hob is able to recognise
most recipients.
•
Test recipient: place your recipient on
one of the rings on power setting
4
.
If the display remains unchanged, your
recipient is compatible.
If it flashes on and off, your recipient
cannot be used with induction.
•
You can also check using a magnet.
If it "sticks" to the base of the recipient,
then this recipient is compatible with
induction.
Removing the recipient from the hob
immediately turns off the power to your
hob. To completely turn off the ring you
should press on the "Stop" button.
"
S
mall item" safety feature
A small object such as a fork, spoon or a
ring placed on your induction hob by itself
is not detected as a pan. The display
flashes and there is no output power.
The display goes out after a few seconds.
Pressing any of the buttons activates the display.
Your cook top is equipped with a
child safety
feature
which locks it during the use:
- Either when stopped (for cleaning)
- Or during cooking (any operations underway will
continue and the displayed settings remain active).
this case, for safety reasons only the "
STOP
" button
is still usable.
Don't forget to unlock the appliance before
reusing it.
Locking the appliance
Unlocking the appliance
Press simultaneously on the locking buttons (
- +)
duntil the display goes out.
- Identify the special locking
buttons
(- +)
placed on top of a sym-
bol representing a padlock (or a key).
- Press simultaneously on these but-
tons
(- +)
until the following informa-
tion is displayed
or
C
hild safety
Using your hob in all simplicity
99633131_GB_A.qxd 15/03/04 14:32 Page 4
