Instruction manual C815C
Please keep this instruction manual for future reference
24
CLEANING AND MAINTENANCE
What?
How?
Important
Everyday
soiling on glass
(fingerprints,
marks, stains
left by food
or non-sugary
spillovers on
the glass).
1. Switch the power to the
hob off.
2. Apply a hob cleaner while the glass
is still warm (but not hot!).
3. Rinse and wipe dry with a clean
cloth or paper towel.
4. Switch the power to the hob back
on.
- When the power to the hob is
switched off, there will be no
“hot surface” indication but the
cooking zone may still be hot!
Take extreme care.
- Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check whether your cleaner or
scourer is suitable.
- Never leave cleaning residue on
the hob as the glass may become
stained.
Boilovers,
melts, and hot
sugary spills on
the glass.
Remove these immediately with
a fish slice, palette knife or razor
blade scraper suitable for ceramic glass
hobs, but beware of hot cooking zone
surfaces:
1. Switch the power to the hob off at
the wall.
2. Hold the blade or utensil at a 30°
angle and scrape the soiling or spill
over to a cool area of the hob.
3. Clean the soiling or spill up with a
dish cloth or paper towel.
4. Follow steps 2 to 4 for ‘Everyday
soiling on glass’ above.
Remove melts and sugary food
or spillovers as soon as possible.
If left to cool on the glass, they
may be difficult to remove or may
even permanently damage the
glass surface.
Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
Spillovers on
the touch
controls.
1. Switch the power to the hob off.
2. Soak up the spill.
3. Wipe the touch control area with a
clean, damp sponge or cloth.
4. Wipe the area completely dry with a
paper towel.
5. Switch the power back on.
The hob may beep and turn itself
off, and the touch controls may
not function while there is liquid
on them. Make sure you wipe
the touch control area dry before
turning the hob back on.