8
BURNERS
GAS
NORMAL
PRESSURE
NOMINAL
RATE
I N J E C T O R
DIAMETER
TYPE BY
PASS
DIAMETER
NOMINAL
HEAT INPUT
(W)
N°
DESCRIPTION
mbar
g/h
L/h
1/100 mm
1/100 mm
Max.
Min.
1
RAPID
G30
28 - 30
225
-
85
42
3000
950
G31
37
214
-
85
42
3000
950
G20
20
-
290
115Y
Reg.
3000
950
G25
25
-
332
121 (F2)
Reg.
3000
950
2
SEMI-RAPID
G30
28 - 30
126
-
65
31
1750
600
G31
37
125
-
65
31
1750
600
G20
20
-
165
97Z
Reg.
1750
600
G25
25
-
194
94 Y
Reg.
1750
600
3
AUXILIARY
G30
28 - 30
71
-
50
27
1000
450
G31
37
71
-
50
27
1000
450
G20
20
-
99
72X
Reg.
1000
450
G25
25
-
111
72 (F1)
Reg.
1000
450
4
TRIPLE RING
G30
28 - 30
278
-
98
60
3800
2100
G31
37
272
-
98
60
3800
2100
G20
20
-
367
135K
Reg.
3800
2100
G25
25
-
421
143 (F3)
Reg.
3800
2100
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance
must be disposed of separately from other domestic refuse at the end of its useful life.
It must therefore be delivered to a waste recycling centre specifi cally for electric and
electronic equipment or returned to the retailer at the moment of purchase of a new
equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the
end of its useful life, Failure to do so may result in a fine, as provided for by laws governing waste
disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally
friendly disposal helps reduce possible negative effects on the environment and health, and also
enables the materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local
Municipal Solid Waste disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfi lling their obligations as regards recycling, treatment
and environmentally friendly disposal by directly or indirectly participating in the collection system.
TECHNICAL CHARACTERISTIC TABLES
The manufacturing firm refuses all responsibility for any possible imprecision in this booklet, due to
misprints or clerical errors. It reserves the right to make all the changes that it will consider necessary in
its own products, without affecting the essential characteristics of functionality and safety.
COD. 208406-00 - 26.10.2010
