Instruction manual C4246
10
11
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual C4246
O V E N I N S TA L L AT I O N
P L E A S E C H E C K T H E F O L L OW I N G B E F O R E I N S TA L L AT I O N :
› The panels of the adjoining furniture should be heat resistant. Particularly when the
adjoining furniture is made of veneered wood, the adhesives should be able to withstand a
temperature of 120˚C. Plastic materials or adhesive which cannot withstand this temperature
will become deformed or unstuck.
› To comply with safety regulations, once the appliance has been fitted it should not be
possible to make contact with the electrical parts.
› All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
› Ensure that the appliance is switched off before replacing the light to avoid the possibility of
electric shock.
IMPORTANT:
› Ensure the oven is disconnected from the mains prior to installation.
› Installation should be carried out according to the instructions by a professionally qualified
person. Caple cannot accept responsibility for any damage to persons, animals or other
items due to incorrect installation.
› Position and secure the support brackets into the adjacent carcases (see Fig.2).
› Position the oven onto the support brackets supplied.
› Secure the appliance into its surround by inserting screws into the 4 holes that can be seen
in the frame of the oven when the door is open (Fig.1).
A
A
A
Fig.1
› For the most efficient air circulation, the oven should be fitted according to the dimensions
shown in Fig.2 and Fig.3
› An opening of at least 70mm must be cut at the bottom of the unit to ensure adequate
ventilation (see Fig.4).
Fig.4
Fig.5
70
70
70
Fig.2
Fig.3
