background image

15

The electronic programmer is a device
with the following functions:
– 24 hours clock with illuminated

display

– Timing of oven cooking with automatic

switch-off (max. 99 minutes).

ELECTRONIC CLOCK

Upon immediate connection of the oven
or after a mains failure, three zeros will
flash on the programmer panel. 
To set the clock it is necessary to  push
the

button and then, within 7 seconds,

the

or

button until you have set the

correct time.

The clock will show zero after a mains
failure.

Attention: When the programmer
display shows three flashing zeros the
oven cannot be switched on. 
The oven can be switched on when the
symbol 

is shown in the display.

A

U

T

O

ELECTRONIC ALARM

The programmer can be used as an
alarm only for a maximum period of 99
minutes. 
To set the alarm, push the 

or 

button until you obtain the desired time
in the display. Once the time has
elasped, an intermittent buzzer, lasting 7
minutes, will start; this can be stopped
by pressing the 

button.

Attention: If the bottom oven is
switched on when the buzzer starts, it
will be automatically switched off. For it
to operate furtherly you have to stop the
buzzer by pressing the 

button.

SETTING THE FREQUENCY OF THE

ALARM SOUND

The selection from 3 possibilities of
sound can be made by pressing the 

button.

Fig. 4.1

COOKING WITH AUTOMATIC
SWITCH-OFF

The aim of this function is to
automatically stop the cooking after a pre
programmed time, for a maximum period
of 99 minutes.
To set the cooking time, push the 

or

button until you obtain the desired

time in the display. The symbol AUTO
will be shown in the display. Then you
adjust the oven thermostat knob
according to the required temperature.
The oven will immediately start to
operate and will work for the pre
programmed time. The display shows the
count down. Clock time can be displayed
by pressing the 

button. Once the time

has elasped, the oven will switch off
automatically, the symbol AUTO will go
off and an intermittent buzzer, lasting 7
minutes, will start; this can be stopped by
pressing the 

button. 

Important: Before the buzzer is stopped
switch off the oven manually.

To cancel the cooking program at any
time press the

and 

buttons

together and release the 

button first.

Electronic clock/end cooking timer

44

Содержание C232SS

































Отзывы: