Instruction manual C2231
12
13
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual C2231
See below for full dimensional drawings of your oven to help with installation.
For a built-in oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature
of 120ºC. Plastic materials or adhesive which cannot withstand this temperature may become
deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
O V E N D I M E N S I O N S
Instruction manual
Please keep this instruction manual for future reference
13
See below for full dimensional drawings of your
steam
oven to help with
installation.
For a built-in
steam
oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when
the adjoining furniture is made of veneered wood, the adhesives should be able
to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot
withstand this temperature may become deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should
not be possible to make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be
removed without the use of a tool.
PRODUCT DIMENSIONS
Instruction manual
Please keep this instruction manual for future reference
13
See below for full dimensional drawings of your
steam
oven to help with
installation.
For a built-in
steam
oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when
the adjoining furniture is made of veneered wood, the adhesives should be able
to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot
withstand this temperature may become deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should
not be possible to make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be
removed without the use of a tool.
PRODUCT DIMENSIONS
540mm
565mm
5mm
555mm
20mm
578mm
540mm
20mm
467mm
593mm
116mm
595mm
5mm
20mm
E L E C T R I C A L C O N N E C T I O N
WA R N I N G : T H I S A P P L I A N C E M U S T B E E A RT H E D
Check that the power rating of the mains supply is suitable for the maximum power of the
appliance as indicated on the rating label.
The fuse rating for this appliance is 20amp.
The appliance is supplied with a mains lead it should be “Hard wired” as follows:
»
The “yellow/green” earth wire, which must be connected to a terminal, and has to be
about 10mm longer than the other wire.
»
The neutral wire has to be connected to the terminal marked with a letter N.
»
The Live wire should only be connected to the terminal marked L.
Mains connection can also be made by fitting a double pole switch with a minimum gap between
the contacts of 3mm, proportionate to the load and complying with the regulations in force.
THE YELLOW/GREEN EARTH WIRE SHOULD NOT BE CONTROLLED BY
THE SWITCH.
When a double pole switch is used for mains supply connection it should be easily accessed, once
the appliance is in position.
I M P O RTA N T:
The mains supply cable should be positioned so that it is never subjected to temperatures which
are more than 50ºC above ambient temperature.
The electrical safety of the appliance can only be guaranteed when it has been correctly connected
to a properly earthed mains electrical supply, as laid down in the current regulations for
electrical safety.
The manufacturer cannot be held responsible for any damage to persons or objects due to lack of
an earth connection.
The ovens are designed to operate with a mono-phase alternating current of 220-240V, 50Hz.
BEFORE THE INSTALLATION OF THE APPLIANCE, CHECK THE SPECIFICATIONS
ON THE RATING LABEL.
