11
3. Set the temperature and the cooking program by using the switch and thermostat
knobs of the oven (see specific chapters).
Now the oven is programmed and everything will work automatically, that is the oven
will turn on at the right moment and end the cooking at the selected time.
During cooking, the
symbol remains on.
By pushing the
button you can see the time that remains until the end of cooking.
The cooking program may be cancelled at any moment by pushing
.
At the end of the cooking time the oven will turn off automatically, the
symbol will
turn off, AUTO will flash and a buzzer will sound, which can be turned off by pushing
any of the buttons.
Turn the switch and thermostat knobs to zero and put the programmer onto “manual”
by pressing the
button.
Attention: A power-cut makes the clock go to zero and cancels the set programs.
After a power-cut, three zeros will flash on the panel.
Setting the Semi-Automatic Oven Cooking
This is used to switch automatically off the oven after the desired cooking time has ela-
psed. To effect the semi-automatic cooking there are two ways:
1. Set the length of the cooking time by pushing the
button and the
button to
advance, or
to go backwards if you have passed the desired time.
or
2. Set the end of the cooking time by pushing the
button and the
button to
advance, or
to go backwards if you have passed the desired time.
AUTO and the
symbol will be on.
Then set the temperature and the cooking program using the oven switch and thermostat
knobs (see specific chapters).
The oven is switched on and it will be switched off automatically at the end of the
desired time.
During cooking, the
symbol remains on and by pressing the button
you can see
the time that remains till the end of the cooking. The cooking program can be can-
celled at any moment by pushing the
button. At the end of the cooking, the oven
and the
symbol will turn off, the AUTO will flash and a buzzer will sound; that can
be stopped by pushing any of the buttons.Turn the switch and thermostat knobs to zero
and set the programmer onto “manual” by pressing the
button.
