Caple BXI910, Инструкция по эксплуатации

Страница: 6 / 15

5
Installation – ducted
Attent Attent Attent Attention! Obs ion! Obs ion! Obs ion! Observe the warning erve the warning erve the warning erve the warning concerning the operation of the appliance concerning the operation of the appliance concerning the operation of the appliance concerning the operation of the appliance
when air is discharged from the room.
when air is discharged from the room. when air is discharged from the room.
when air is discharged from the room.
1) Position the hanging plate on the ceiling and then mark the position of
the screw holes. The hanging plate should be securely fixed to the ceiling,
11 x ST6 (40 mm) screws for wooden ceiling
8 x expansion bolts for cement ceiling
2) Fix the angle bars to the hanging plate, using the 8 x M5 screws
3) Extend the angle bars to the required height and then fix them in position
using the 16 x M5 screws and nuts with metal washers.
IMPORTANT: The angle bars must have an overlap of AT LEAST 100 mm. IMPORTANT: The angle bars must have an overlap of AT LEAST 100 mm. IMPORTANT: The angle bars must have an overlap of AT LEAST 100 mm. IMPORTANT: The angle bars must have an overlap of AT LEAST 100 mm.
.