7
STEP 3: FITTING THE SURROUND PADS
Lay the Surround Pads (Part L) on top of the
frame.
Then, on the underside of the pads, push an
elasticated tie through the two eyelets and then
wrap around the frame edge and tie off.
Repeat for all 16 ties.
Note: a small screwdriver or pliers may assist
with pulling the tie through the eyelets.
Finally remove a single spring underneath where
each pad sections joins the next one. Then
insert the spring through the loop on the
underside of the pad & re-attach the spring.
This will stop the front of the pads lifting up.
