Sirius MF&WD Version 1 November 2013
Nearly always caused by poor fuel quality – check the moisture content of the wood you are burning with a Capital
moisture meter.
Fire burning too low, open the air vents on the stove to create a hot fire, this may ‘burn’ the glass clean.
If glass requires cleaning use Capital glass cleaner from your supplier, only use glass cleaner on cold glass.
DO NOT USE
abrasives or scrapers, these will scratch the glass making tar build up harder to remove.
NEVER
spray aerosols near the
appliance when it is alight.
Un-burnt Fuel
Insufficient air reaching fuel - Adjust the air controls to supply combustion air to burn fuel fully.Check if the ash pan is
full, empty if required. Front bar/fret may be blocked, de-ash. Check for jammed clinker or nails in grate when the fire
is out and cold.
Component Parts
Refer to the key on the following page. Many spare parts are stocked – please refer to your retailer or supplier if you
require any replacement parts.
Please only use components made specifically for your stove.
