power source
ac connection
Insert the small end of the AC adaptor into the DC In Jack (located on the rear of
the unit). Connect the other end to a wall outlet providing 100-240V AC, 50/60 Hz.
The output of the provided AC/DC Adaptor is DC 5V 2A.
notes:
Disconnect both ends of the power cord when not in use.
Use only the supplied AC adaptor with the following specs:
AC In - 100-240V AC, 50/60Hz / DC Out - 5V 2A
AC outlet
AC adapter’s plug
(bottom of unit)
battery installation
Two “AAA” size batteries provide backup power for the clock. To install:
!
Open the battery door
"
Insert two “AAA” batteries as shown. Alkaline batteries
are recommended for the longest life.
#
Close the battery door
notes:
The batteries are used to backup the clock, alarm times and radio presets when the AC adaptor is
disconnected or there is a power failure.
The battery indicator will appear or blink in the display when there are no batteries or when the batteries are low
and need to be replaced.
inside the box
Ci200 compact dual alarm, AC power adapter and user guide.
